Slot Diffuser

-_Unit comes completely assembled for ease of field installation.

-_Tight sealing nylon bushings prevent rattling and minimize leakage.

-_Ratchet assembly holds the blade in a constant position - regardless of air flow.

Factory supplied plenum boots engineered to compliment the
Air Managers slot air diffusers.

24 gauge galvanized steel, insulated or non-insulated construction

Available with optional balancing dampers.

Choice of manual quadrant or optional spring loaded
design for through the face adjustment

The Air Managers slot air diffuser has
been supplied to the HVAC industry for
more than twenty years. These products
meet the requirements of continuous
curved or linear applications, modular
designs, short linear and T-Bar
applications. The design characteristics
of this product line provide excellent
air diffusion capabilities and offer an
aesthetically acceptable product
for the designer.

The standard “HORIZONTAL” (H)
pattern controller can be easily
adjusted from the face to provide
left or right hand throw as well as
downward. The high aspect ratio
utilizes “surface effect” to provide
maximum throws without dumping.
The high induction characteristics
provide superior performance for
variable volume systems.

The optional “DIRECT THROW” (D)
pattern controller provides a jet
stream that is excellent for high
bay applications, vertical
projection for perimeter
zones, and can be
effectively used in
sidewall applications
that require extended
throw patterns.

Both of these units are supplied in single or multiple slot patterns in widths of 3/4”, 1”,
1-1/2”, 2”, 2-1/2” and 3”. They are supplied in lengths up to twelve feet which minimizes
joints, provides straight and true installations, and reduces installation time.
The standard finish is baked white with black pattern controllers.
Standard construction is heavy gauge extruded aluminum.

With a wide variety of frame styles,
Air Managers can be integrated
into virtually any ceiling system.
From a fineline suspended
ceiling to an integrated curved
slot that virtually becomes
part of the ceiling assembly.
These products provide the
comfort required and meet
the architectural look
required by the designer.

The LTSC and the MCS are two of Air Managers most popular frame styles

MCS Frame
FOR CONCEALED MOUNTING

The MSD modular slot diffuser is
designed to compliment the rest of the
Air Managers linear slot products.
This diffuser is designed to be used with
lay-in, concealed, or hard ceilings.
The standard modular size is 24” x 24”.
Standard slot width is 1” with 1-1/2”
and 2” available on special order.
Units can be provided with integral,
lined plenums or hoods.